This plan provides the best service and parts coverage. It is designed for hot air, oil-fired systems, or gas with A/C or heat pump connected to the furnace.
- One cleaning, tune up, and adjustment to the oil burner, furnace, flue pipe, base of chimney (where accessible), and lubrication of motor and bearings.
- Equipment is adjusted to maximum efficiency.
- Contracts cover one hour of the labor on all parts listed below. All after hours, weekends and holidays will be billed at their prevailing rates. Additional labor will also be billed at their prevailing rates.
PUGS 15-POINT PRECISION A/C TUNE UP:
- Check Starting Capabilities
- Check Safety Controls
- Check and Replace Air Filter (supplied by owner)
- Check Thermostat
- Check all Electrical Connections
- Check Voltage and Amperage on Motors
- Lubricate All Moving Parts Where Necessary
- Clean and Check Condenser
- Clean and Check Evaporator Coil (must be accessible)
- Check Operating Pressures
- Check Refrigerant for Proper Amount
- Check and Adjust Blower Components
- Check for Correct Air Flow
- Clean Condensate Drain Where Accessible
- Check for Proper Temperature Difference
One hour of labor is covered on items listed below. Additional labor will be billed at prevailing rates.
PARTS COVERED ON FURNACE WITH 25% DISCOUNT:
- Burner Motor (up to 1/6 hp)
- Burner Coupling
- Burner Fan
- Burner Nozzle
- Blower Motor (up to 1/2 hp)
- Blower Wheel
- Cad Cell Relay (basic only)
- Cad Cell Eye
- Circulator Coupling
- Emergency Toggle Switch
- Ignition Cable
- Oil Pump (basic only)
- Oil Filter (basic only)
- Oil Filter Cartridge (basic only)
- Oil Pump Strainer
- Thermostat (plain)
- Transformer (basic only)
This plan also includes Pugs Precision Tune Up with extensive parts coverage for your Air Conditioning or Heat Pump.
PARTS COVERED A/C OR HEAT PUMP 25% DISCOUNT:
- Blower Motor (up to 1/2 horsepower)
- Condenser Motor
- Contractors
- Motor Starters
- Running Capacitors
- Starting Capacitors
- Thermostat (standard)
- Contactor
EXCLUSIONS:
- All Refrigerants
- All Genisys Controls
- ECM or Veritable Speed Motors, regardless of size
- Main furnace/fan control board
- Chimney work (Pugs Home Services is not responsible for any damages caused by a chimney related problem)
- Riello primary control
- Riello oil pump
- Riello motor
- Fan Timer / Control Board
- Frozen or Clogged Oil Lines. Any Oil Related Problems
- Any Oil Related Problems
- Lack of Electric Power
- If you are not home at the time of your scheduled appointment, a missed appointment charge will be added to your account at the prevailing rates.
- If we are unable to access your equipmenbt for any reason, you will be billed at the prevailing rates.
- Obsolete Parts.
One hour of labor is covered on items listed below. Additional labor will be billed at prevailing rates.
PLAN: Combined Heating/AC Plan 24-C
